Headrests and Hardware
Headrest Pads
Part Number
7750
Slight Curve Headrest Pad
Base constructed of 1/4” Kydex with 1” 5# foam
Width and height can be specified or standard sizes are available (ref below)
Please provide upholstery type and color
| Standard Pad Sizes: | |||
|---|---|---|---|
| Size: | Outside Width: | Opening Width: | Height: |
| Small: | 11" | 5" | 3-3/4" |
| Medium: | 11" | 6" | 3-3/4" |
| Large: | 12" | 6-1/2" | 4" |
| X Large: | 12" | 7-1/2" | 4" |
| Standard Sizes Circumference: | |
|---|---|
| Small: | 18" |
| Medium: | 20" |
| Large: | 23" |
| X Large: | 25" |
7753
Three Piece Pad - Hinged Adjustable
Features 3 separate pads made up of 1/4” Kydex base with 1” 5# foam
Center pad has side pads attached with adjustable hinges
Pad designed to aid in control of ATNR and add support for poor head control
| Standard Pad Sizes: | |
|---|---|
| Small: | 4" x 4" |
| Medium: | 4" x 5" |
| Large: | 5" x 5" |
7756
Chubbie Headrest Pad
Constructed of 1/4” Kydex with 1” 10# base and 1” 4# foam on top
Standard upholstery is L-05. Naugahyde and nylon not available
Custom sizes available: Specify either width x height
| Standard Sizes: | |
|---|---|
| Small: | 10"W x 4"H |
| Medium: | 12"W x 5"H |
| Large: | 13-1/2"W x 4-1/2"H |
7760
Skinny Headrest Pad
Features a 1/4” Kydex base with 1/2” medium Sunmate foam
Foam is rolled over edges of base for skin protection
Standard upholstery is L-05
Zipper allows access to the foam
Custom sizes available. Specify either width x height
| Size: | Width: | Height: | Depth: |
|---|---|---|---|
| Small: | 8" | 4-1/2" | 2-1/2" |
| Medium: | 10" | 4-1/2" | 2-1/2" |
| Large: | 12" | 4-1/2" | 2-1/2" |
| X Large: | 14" | 4-1/2" | 2-1/2" |
7700
Vertical & Depth Adjustable Hardware
Vertically removable and height adjustable with a star knob
Offers both anterior and posterior adjustments
7701
Multi-Adjustable Removable Hardware
7703
Flip Back Hardware Long Post/Multi Axial Mount
7708
Rock & Roll Headrest Hardware
Features 2 knuckle joints that allow for multi-axial adjustment in the mid-sagital plane
Reinforced with 2 bolts at each knuckle joint to prevent slippage
Hardware is mounted to a horizontal track allowing for incremental placement
Cannot interface with 7763 pads
7709
Rock & Roll Flip Back Headrest Hardware
7733
Headrest Adapt-A-Plate Hardware
No more custom T-nut patterns are needed for headrests!
77 Platemate
Platemate
No more custom T-nut patterns are needed for headrests!
Not Sure Where To Start?
Navigating the world of wheelchairs and accessories can be overwhelming, but rest assured that our experienced and knowledgeable customer support team is here to guide you through every step. Let’s talk!